and osu!

Based on RB3KB-USB2MIDI but without the MIDI. Since the RB3 keyboard (especially the PS3 one) is a bit quirky and using Phase Shift with MIDI Link only allows you to play Keys, this program maps the controller to the default Phase Shift keyboard controls (1-5, tab, backspace, enter, delete) so you can also play Guitar/Bass.

I'm not very good at Phase Shift by the way; I've barely tested this.

Windows Binary and C# Source Code

• R1: osu! and Phase Shift: http://jasonharley2o.com/projects/rb3usb/keyboard/osu/
• R0: Phase Shift only: http://jasonharley2o.com/projects/rb3usb/keyboard/phaseshift/

• Windows with .NET 4.5 Framework,
• LibUSB filter driver, e.g. wizard from LibUsbDotNet,

Compile with Visual Studio 2015, and LibUsbDotNet - the package on NuGet will do.

Install the LibUSB filter driver on your keyboard, keep in mind this is per USB port. PS3: “vid: 12ba pid:2330” or Wii: “vid: 1bad pid:3330”.

Run RB3KB-USB2MIDI and click “Doing Nothing” to run. Play Phase Shift or osu!

If you notice the PS3 keyboard keys aren't working, you may have to reconnect/restart the program a few times until it activates the keys.

As with RB3KB-USB2MIDI it'll probably crash or throw an error message randomly.

• The console buttons (the far right white key is mapped as 5/orange), touch strip and overdrive should be fine.
• The touch strip had to be mapped to pressing delete, so it's not analog.
• White keys (and two of the black) will generally also strum when a new key is pressed down. I expect this will cause a lot of problems with chords. Can probably solve this by timing how long ago the last strum was.
• In guitar mode you can cheese repeating chords by just releasing and pressing one of the keys.
• Keys 12/14/16/22 and if connected a drum pedal will just press enter (this might be useful for bass guitar).
• The mapping was aimed to be the same as the emulated RB1 guitar Arduino project.